physiographic-units-level-1-1250000-ireland-roi-itm
Data Resources (5)
WMS
WMS
SHP
ESRI Shapefile
ESRI REST
ESRI REST
HTML
Data Viewer
PDF
PDF Report
Data Resource Preview - WMS
| Téama | Eolaíocht |
|---|---|
| Dáta eisithe | 2018-04-11 |
| Dáta nuashonraithe | 2021-10-18 |
| Cloíonn an tacar sonraí leis na caighdeáin seo | The INSPIRE Directive or INSPIRE lays down a general framework for a Spatial Data Infrastructure (SDI) for the purposes of European Community environmental policies and policies or activities which may have an impact on the environment. |
| Nótaí Cearta | ['Creative Commons Attribution 4.0 International (CC BY 4.0)', 'Data that is produced directly by the Geological Survey Ireland (GSI) is free for use under the conditions of Creative Commons Attribution 4.0 International license.\n\nhttps://creativecommons.org/licenses/by/4.0/\n\nhttps://creativecommons.org/licenses/by/4.0/legalcode\n\nUnder the CC-BY Licence, users must acknowledge the source of the Information in their product or application.\n\nPlease use this specific attribution statement: "Contains Irish Public Sector Data (Geological Survey Ireland) licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence".\n\nIn cases where it is not practical to use the statement users may include a URI or hyperlink to a resource that contains the required attribution statement.', 'license'] |
| Minicíocht Nuashonraithe | Riamh |
| Teanga | English |
| Lamairne | https://dcenr.maps.arcgis.com/apps/webappviewer/index.html?id=afa76a420fc54877843aca1bc075c62b |
| Clúdach Geografach i bhformáid GeoJSON | {"type":"Polygon","coordinates":[[[-11.0, 50.0],[-11.0, 56.0], [-5.0, 56.0], [-5.0, 50.0], [-11.0, 50.0]]]} |
| SRS | Irish Transverse Mercator (ITM, EPSG:2157) |
| Méid Ingearach | {"verticalDomainName": "sea level", "minVerticalExtent": "0", "maxVerticalExtent": "1041"} |
| Eolas Dualfhoinse | Visual analysis of four main digital data sources aided the construction of the national physiographic units map: (1) Geological Survey bedrock geology maps at 1:100,000 and 1:500,000 scale; (2) Geological Survey Quaternary sediments and geomorphology maps at 1: 50,000 scale; (3) Hydrographically corrected DEM with 20 m pixel size (EPA) and 5 m pixel size DEM (Ordnance Survey Ireland, OSI); (4) High resolution digitalglobe orthophotography dataset and national digital premium basemap map service cached from 1:4,000,000 to 1:1,000 scale (OSI). Quaternary sediments and geomorphology datasets, allied with the bedrock geology maps and the DEMs, enabled the differentiation of regions dominated by distinctive geomorphological features (e.g. drumlins, eskers, peat bogs, etc.). The analysis of these datasets was combined with slope, altitude and hill-shade maps generated from the DEMs, which permitted differentiating broad altitude thresholds and convex, concave and straight segments in slope. The defining elevation cut-offs between mountains, hills and lowlands are not universally standardised across the world, and this lack of a proper subdivision between these landscape sets also exists in Ireland. The threshold between mountain and hill adapted for this work follows work by the United Nations Environmental Programme (after Gardner, 1972), which defines a mountain as an “Elevation of at least 300 m, with a 300 m elevation range within 7 km” (Blyth et al, 2002). This threshold is unofficially reinforced in Ireland, by the digital 1:50,000 to 1:150,000 scale OSI topographic maps, which commonly indicate areas over 300 m as ‘mountains’. Although a systematic threshold for mountain cannot be determined from these maps, as some named mountains are lower than 300 m and some higher regions are not marked as such, 300 m is in most cases the minimum altitude reached by ‘mountains’ in Ireland. Landforms extending above the surrounding landscape often with a distinct summit ranging between 100 and 300 m altitude were classified as hills, to some extent in the Physiographic Units Map of Ireland Areas of lower elevation were generally characterized by the dominant sediment type within them, coupled with the dominant constituent landform (e.g. ribbed moraine, hummocky moraine, raised bog, etc.). The visual analysis of the datasets listed above within a GIS environment coupled with expert judgment was used to delineate the outline of the discrete physiographic units. The mapping delineation consisted of three main steps: (1) Production of physiographic unit maps for three pilot areas showing particularly differing landscapes (the Suir River catchment, the North Midlands drumlin belt and the western coastal stretch between Connemara and the mouth of the Shannon River) aiming to define a preliminary classification scheme. (2) Production of a nationwide map focusing on the delineation of physiographic units based on the DEM topography, Quaternary geomorphology, Quaternary sediments and bedrock datasets as listed above, followed by further development and definition of a more accurate classification scheme. (3) Merging and reclassification of physiographic units and editing of their outlines based on major changes on slope and altitude thresholds, as identified from slope and altitude maps constructed from DEMs. The data were digitized at scales ranging from 1:30,000 to 1:100,000 with the objective of generating a final dataset to be used at 1:250,000 scale. The use of a minimum physiographic unit size of 5 km2 was considered appropriate, an area of 5 km2 on the ground, cover approximately 0.8 cm An exception was made for islands less than 5 km2 as islands bigger than 0.1 km2 are included in the map. As well as this, five small physiographic units located along coastal areas showing particularly differing landscape character from the neighboring units were also allowed as exceptions. It should be noted that the resulting physiographic units map is designed for general information and broad-scale planning usage. The boundaries are based on the interpretation of the datasets listed above, on many instances local details had to be generalised to fit the map scale. Characterization of the physical landscape at a larger scale will require further and more exhaustive assessment, and may frequently require of site investigation. The map was created using ArcGIS software. In 2021, the data structure was reviewed and a new database was created in ArcGIS Enterprise. Using ArcGIS Pro 2.6.3, the dataset was renamed as part of a GSI data standardisation process. A standardised dataset alias was added. A unique id field was added. A new unique identifier was added for each record using an attribute rule. The Physiographic Class field was renamed and an alias added. A domain was created for the field to ensure attribute integrity for that field. The attribute values can only be added from pre-defined GSI tables. All existing attributes and the geometry were checked. Metadata was updated to the new GSI standard based on INSPIRE and ISO standards. |
Derilinx