-
The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with mea
-
Environment
Wave climate forecasts including significant wave height, mean wave period, mean wave direction, wave per unit crest length, peak period and energy period at Marine Institute weather and wave buoy locations.
-
The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with mea
-
Estimated annual average wave height (metres) created by a Pelamis Wave Model for Accessible Wave Energy Resource Atlas. Wave height values are measured as lower and upper values in metres as calculated by the Pelamis wave model. Annual average wave height covers an area known a
-
Environment
Marine Institute daily oceanographic model of particle transport probability at the surface, 20m and bottom of the water column in Bantry Bay and Mizen Head. Data attribute structure includes time, release location, longitude, latitude, particle hours and particle track.
-
Environment
A tidal atlas or a tidal stream atlas is used to predict the direction and speed of tidal currents. A tidal atlas usually consists of a set of 12 or 13 diagrams, one for each hour of the tidal cycle, for a coastal region. Each diagram uses arrows to indicate the direction of the
-
Sea surface temperature is collected via permanent scientific equipment on board the MI research vessel RV Lough Beltra. Data includes temperature from the hull mounted sensor known as 'Hull Sea Temperature' and temperature/salinity from the temperature sensor known as 'Windmill
-
Environment
CTD or Conductivity Temperature Depth stations measure temperature, conductivity and depth of the water column at various depths from the surface to within 10m of the seafloor. A CTD is the oceanographic instrument used to determine the conductivity, temperature, and depth of the
-
Environment
Waverider buoys have collected observations and measurements on wave characteristics including wave height and period statistics. Waverider buoys are located in the Galway Bay 1/4 Scale Test Site and the Full Scale Atlantic Marine Energy Test Site (AMETS) located off the Erris Pe
-
This dataset has no description
-
This dataset represents an initial comparison between several years of hourly wave forecasts (using WAM) on a grid of points located off the Irish coast with corresponding records from a number of buoys installed pre 2005. Based on the level of agreement found the wave forecasts
-
The Accessible Wave Energy Resource Atlas published in 2005 describes an initial comparison between several years of hourly wave forecasts (using WAM) on a grid of points located off the Irish coast with corresponding records from a number of buoys installed in recent years. Base
-
SWAN (Simulating Waves Nearshore) is a third-generation wave model which was primarily developed for use in coastal regions. The operational East_Atlantic model used to generate this dataset was an implementation of the SWAN model for Irish waters. The East Atlantic SWAN Wave Mod
-
The cruise track inventory shows the locations of surveys completed by the RV Lough Beltra research vessel. The geographic coverage of the Lough Beltra is mainly in inshore areas around Ireland including the Irish Sea, Saint George's Channel, Celtic Sea and North Atlantic Ocean.
-
Environment
The Irish Weather Buoy Network is a network of 5 weather buoys around Ireland. These weather buoys are moored surface buoys with instruments which collect weather and ocean data including air temperature, atmospheric humidity, sea surface temperature, sea temperature and salinity
-
The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with mea
-
SWAN (Simulating Waves Nearshore) is a third-generation wave model which was primarily developed for use in coastal regions. The operational East_Atlantic model used to generate this dataset was an implementation of the SWAN model for Irish waters. The East Atlantic SWAN Wave Mod
-
These points are locations for ‘Stories’ on Catchments.ie - Catchments.ie is trying to make complicated science and policy relevant to the general public, and using “Stories” specific to local locations is one way this is being done.
-
Research cruise survey tracks generated from underway and windmill stations for Celtic Voyager cruises completed between 1997 and 2015. Survey operations have been undertaken across many scientific disciplines including geology, biology, chemistry, oceanography and marine science
-
SWAN (Simulating Waves Nearshore) is a third-generation wave model which was primarily developed for use in coastal regions. The operational East_Atlantic model used to generate this dataset was an implementation of the SWAN model for Irish waters. The East Atlantic SWAN Wave Mod
Contact Information
Open Data UnitDepartment of Public Expenditure Infrastructure Public Service Reform and Digitalisation,
St. Stephen’s Green House,
Earlsfort Terrace, D02 PH42 Dublin 2 Ireland.
Give us feedback
The Open Data Unit values your feedback, questions or comments. We are always delighted to hear from you.
Derilinx