Noise Round 4 Airport Agglomeration (Lden)

Category: Health
Views: 1
Openness rating:

This is a polygon dataset of the strategic noise mapping of agglomeration airports for Round 4 (2022), representing the situation during 2021, in the form of noise contours for the Lden (day, evening, night) period. The dB value represents the annual average Lden indicator value in decibels over 24 hours.
The values are calculated at a height of 4.0m above local terrain, not measured, and should be treated with caution when looking at specific locations. The strategic noise mapping of agglomeration airports was undertaken by Dublin Airport Authority.
The outputs of the Round 4 noise mapping exercise were generated using a new common noise assessment method for Europe (CNOSSOS-EU), as set out in the revised Annex II of Directive 2002/49/EC, and they are not directly comparable to any strategic noise maps previously generated under Rounds 1 to 3, as these revised methods calculate noise emissions, propagation and residential population exposure differently from the methods used in previous rounds.
The noise maps are the product of assimilating a collection of digital datasets, and over the last 15 years there have been ongoing significant improvements to the quality of the digital datasets describing the natural and built environment in Ireland, therefore the Round 4 strategic noise mapping includes changes to the model input datasets being used, compared to previous rounds, particularly related to the aircraft modelled and the terrain model. The strategic noise maps should not be relied upon in the context of planning applications for noise sensitive developments in the vicinity of the mapped sources.

Data Resources (9)

HTML
available as HTML
HTML
available as HTML
HTML
available as HTML
WFS
available as WFS
HTML
available as HTML
HTML
available as HTML
HTML
available as HTML
HTML
available as HTML
HTML
available as HTML

Data Resource Preview - GeoJSON

Theme Health
Date released 2023-09-08
Date updated 2023-10-12
Dataset conforms to these standards The INSPIRE Directive or INSPIRE lays down a general framework for a Spatial Data Infrastructure (SDI) for the purposes of European Community environmental policies and policies or activities which may have an impact on the environment.
Rights notes {"no limitations",https://creativecommons.org/licenses/by/4.0/,license}
Update frequency Other
Language English
Landing page https://gis.epa.ie/EPAMaps/EnvironmentAndWellbeing
Geographic coverage in GeoJSON format {"type":"Polygon","coordinates":[[[-10.47472, 51.44555],[-10.47472, 55.37999], [-6.01306, 55.37999], [-6.01306, 51.44555], [-10.47472, 51.44555]]]}
Spatial Reference Systems (SRS) TM65 / Irish Grid (EPSG:29902)
Vertical Extent {"verticalDomainName": "EPSG Projection 5731 - Malin Head height", "minVerticalExtent": "0", "maxVerticalExtent": "1014"}
Provenance information Strategic noise maps are to be made every 5 years by noise mapping bodies designated under the European Communities (Environmental Noise) Regulations, SI 549 of 2018, which transposed EC Directive 2002/49/EC into Irish legislation. These strategic noise maps were prepared for Round 4 (2022), representing the annual average situation during 2021. The strategic noise maps are to be used to identify priorities for noise action plans, which are to be made or revised every 5 years by designated action planning authorities, namely Local Authorities. They can also be used to identify potential Quiet areas in the three noise agglomerations. This is a polygon dataset of the strategic noise mapping of agglomeration airports, in the form of noise contours for the Lden (day, evening, night) period for Cork, Dublin and Limerick agglomerations. The contour polygons are derived by interpolation from calculated points on a regular 100m spacing located outside building footprints. Calculations were undertaken using FAA AEDT software in line with the methodology in the consolidated Annex II of Directive 2002/49/EC as of 28 July 2022. The noise calculations take into consideration sources of noise generated by the aircraft movements; i.e. from start-of-roll, acceleration down the runway, the period when the aircraft is airborne, and deceleration along the runway after touchdown, including reverse thrust if employed. This noise is commonly referred to as air noise. Other sources of aircraft noise generated whilst the aircraft are on the ground, such as from taxiing, maneuvering or during engine ground running are excluded from this assessment. The dB value represents the annual average Lden indicator value in decibels over 24 hours. The values are calculated at a height of 4.0m above local terrain, not measured, and should be treated with caution when looking at specific locations. The strategic noise mapping of agglomeration airports was undertaken by Dublin Airport Authority. The outputs of the Round 4 noise mapping exercise were generated using a new common noise assessment method for Europe (CNOSSOS-EU), as set out in the revised Annex II of Directive 2002/49/EC, and they are not comparable to any strategic noise maps previously generated under Rounds 1 to 3, as these revised methods calculate noise emissions, propagation and residential population exposure differently from the methods used in previous rounds. The noise maps are the product of assimilating a collection of digital datasets, and over the last 15 years there have been ongoing significant improvements to the quality of the digital datasets describing the natural and built environment in Ireland, therefore the Round 4 strategic noise mapping includes changes to the model input datasets being used, compared to previous rounds, particularly related to the aircraft modelled and the terrain model. The strategic noise maps should not be relied upon in the context of planning applications for noise sensitive developments in the vicinity of the mapped sources.
Period of time covered (begin) 2012-01-14
Period of time covered (end) 2015-04-17