-
A permanently moored thermistor chain at the deepest point in Lough Feeagh measures water temperature at 13 depths (0.9, 2.5, 5, 8, 11, 14, 16, 18, 20, 22, 27, 32, 42). This dataset comprises data collected between 2004 and 2019 which has gone through detailed QA/QC. More...
-
The GO-SHIP A02 survey was completed in April/May 2017 on the RV Celtic Explorer, travelling from St. John's, Newfoundland, Canada, across the North Atlantic to Galway, Ireland. A total of 67 stations were occupied along the A02 transect, with 1231 nutrient samples analysed...
-
EnvironmentThe AtlantOS aquaculture site selection product described here was derived from a physical model; validated by the In-situ ocean data. A number of variables (bathymetry, wind, wave and currents, exposure) were used to develop the product. The dataset avaialble here is a...
-
The water temperature is measured at a depth of 1 metre, using a StowAway TidbiT temperature data logger from Onset (TBI32-05+37) (https://www.onsetcomp.com/products/data-loggers/tbi32-0537 ). The logger is permanently moored over the deepest point of the lake, and records...
-
Burrishoole catchment water colour measurements, and associated environmental driversEnvironmentWater colour is measured routinely in the Burrishoole catchment at several different locations as part of the ongoing LTER (long term ecological research) program of monitoring. Water colour is a good proxy measurement of DOC (Dissolved Organic Carbon). This dataset is...
-
The water temperature is measured at a depth of 1 metre, using a StowAway TidbiT temperature data logger from Onset (TBI32-05+37) (https://www.onsetcomp.com/products/data-loggers/tbi32-0537 ). The logger is permanently moored over the deepest point of the lake, and records...
-
EnvironmentThe Mill Race links upstream Lough Feeagh with Downstream Lough Furnace. The channel is short (200 metres) and shallow ( None Suggested Citation: Dillane, Mary; de Eyto, Elvira; Cooney, Joseph; Hughes, Pat; Murphy, Michael; Nixon, Pat; Sweeney, David; Poole, Russell. (2018)...
-
International Council Exploration of the Sea (ICES) statistical rectangle boundary administrative units for offshore King Scallop monitoring and reporting. The ICES statistical rectangle boundaries used occur in the North Atlantic Ocean, Celtic Sea, Irish Sea, Saint Georges...
-
EnvironmentThe buoy previously stationed at M1 was relocated to M6 at the request of the Met Services. At the M1 station data collection was discontinued in 2007. FS1 is an archive dataset. Please note the weather buoys maybe intermittently inoperative during periods of servicing, or due...
-
National Monitoring Programme for Phytoplankton Species occurrence in Aquaculture Production AreasEnvironmentThe Phytoplankton National Monitoring Programme for the identification and enumeration of phytoplanktonic species is an important measurement in the detection of those species which may form a Harmful Algal Bloom event. Where favourable environmental conditions occur, some...
-
EnvironmentMultibeam echosounder data and seabed sampling data acquired during the INFOMAR and INSS national seabed mapping programmes are the primary sources of data used in the generation of this collated seabed classification/marine habitats layer. Lower resolution interpretations of...
-
EnvironmentThe Irish Wave Power Atlas published in 2005 describes an initial comparison between several years of hourly wave forecasts (using WAM) on a grid of points located off the Irish coast with corresponding records from a number of buoys installed in recent years. Based on the...
-
EnvironmentThe SWAN wave model runs for a domain covering Irish waters at a resolution of 0.025 degrees. The model runs every day to produce a 6 day forecast using NCEP GFS wind forcing and FNMOC Wave Watch 3 data for the wave boundaries. The forecast is generated for research purposes...
-
EnvironmentModel means are only available for 12:00am for the 15th day of every month. Monthly mean values for oceanographic parameters in Irish waters from the Marine Institute SWAN and ROMS models. Mean values include: Sea surface temperature (degreeCelsius), Sea bottom temperature...
-
CTD (Conductivity, Temperature, Depth) measures temperature, salinity, turbidity and flourescence in the water column. Sea temperature is a measurement of the temperature of the water column as the SBE instrument samples to various depths. Salinity is a measure of the salt...
-
Network of tide gauges located around the coast of Ireland collecting water level data as part of the development of a permanent tidal monitoring infrastructure. Parameters collected include; Station (ID), dateTime (yyyy-mm-ddThh:mm:ss), Water Level (Sea Level above Lowest...
-
The dataset indicates the location for pot fishing activity in Irish waters. Attributes when known include year, area, gear type, species, season, days per year (Days_Year), number of vessels (Vessels), vessel size (LOA_Max), gear units, classification, Area of polygon...
-
The dataset indicates the location of net fishing activity in Irish waters. Attributes when known include year, area, gear type, species, season, days per year (Days_Year), number of vessels (Vessels), vessel size (LOA_Max), gear units, classification, Area of polygon...
-
The dataset indicates the location for mid-water trawl fishing activity in Irish waters. Attributes when known include year, area, gear type, species, season, days per year (Days_Year), number of vessels (Vessels), vessel size (LOA_Max), gear units, classification, Area of...
-
The dataset indicates the location for line fishing activity in Irish waters. Attributes when known include year, area, gear type, species, season, days per year (Days_Year), number of vessels (Vessels), vessel size (LOA_Max), gear units, classification, Area of polygon...