1. Baile
  2. Tacair Shonraí

31 Torthaí

Catagóirí: Environment None: water science Foilsitheoir: Marine Institute

Filter Results
  • 860 views
    Data from the underway system includes observations and measurements of meteorological (e.g. air temperature, atmospheric pressure, relative humidity, wind speed and direction) at 10m above sea level and oceanographic (e.g. sea surface temperature/salinity) at approximately 3m...
  • 197 views
    Sea surface temperature was collected via permanent scientific equipment on board the MI research vessel RV Celtic Voyager. Data includes temperature from the hull mounted sensor known as 'Hull Sea Temperature' and temperature/salinity from the temperature sensor known as...
  • 99 views
    The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with...
  • 443 views
    Temperature and salinity measurements taken from the Weather Buoys. Temperature and salinity instrumentation associated with mooring.
  • 536 views
    The dataset provides sea surface temperature and sea temperature information from a network of internal logging temperature sensors at 17 locations around the Irish coast. The TidbiT Temperature loggers have recorded hourly at each site providing a comprehensive time series...
  • 201 views
    The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts of ocean temperature, salinity and currents are generated...
  • 773 views
    Acoustic Doppler Current Profile (ADCP) hydroacoustic current meter data is similar to a sonar, attempting to measure water current velocities over a depth range using the Doppler effect of sound waves scattered back from particles within the water column. The term ADCP is a...
  • 149 views
    The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with...
  • 354 views
    Monthly mean (average) values for oceanographic parameters in the North Atlantic Ocean SWAN and ROMS models. Mean values have been calculated on a monthly basis include sea surface temperature (degreeCelsius), sea bottom temperature (degreeCelsius), sea surface salinity (PSU),...
  • 385 views
    The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with...
  • 317 views
    Wave climate forecasts including significant wave height, mean wave period, mean wave direction, wave per unit crest length, peak period and energy period at Marine Institute weather and wave buoy locations.
  • 174 views
    The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with...
  • 132 views
    Marine Institute daily oceanographic model of particle transport probability at the surface, 20m and bottom of the water column in Bantry Bay and Mizen Head. Data attribute structure includes time, release location, longitude, latitude, particle hours and particle track.
  • 2078 views
    A tidal atlas or a tidal stream atlas is used to predict the direction and speed of tidal currents. A tidal atlas usually consists of a set of 12 or 13 diagrams, one for each hour of the tidal cycle, for a coastal region. Each diagram uses arrows to indicate the direction of...
  • 129 views
    Sea surface temperature is collected via permanent scientific equipment on board the MI research vessel RV Lough Beltra. Data includes temperature from the hull mounted sensor known as 'Hull Sea Temperature' and temperature/salinity from the temperature sensor known as...
  • 1337 views
    CTD or Conductivity Temperature Depth stations measure temperature, conductivity and depth of the water column at various depths from the surface to within 10m of the seafloor. A CTD is the oceanographic instrument used to determine the conductivity, temperature, and depth of...
  • 621 views
    Waverider buoys have collected observations and measurements on wave characteristics including wave height and period statistics. Waverider buoys are located in the Galway Bay 1/4 Scale Test Site and the Full Scale Atlantic Marine Energy Test Site (AMETS) located off the Erris...
  • 452 views
    SWAN (Simulating Waves Nearshore) is a third-generation wave model which was primarily developed for use in coastal regions. The operational East_Atlantic model used to generate this dataset was an implementation of the SWAN model for Irish waters. The East Atlantic SWAN Wave...
  • 114 views
    The cruise track inventory shows the locations of surveys completed by the RV Lough Beltra research vessel. The geographic coverage of the Lough Beltra is mainly in inshore areas around Ireland including the Irish Sea, Saint George's Channel, Celtic Sea and North Atlantic...
  • 4912 views
    The Irish Weather Buoy Network is a network of 5 weather buoys around Ireland. These weather buoys are moored surface buoys with instruments which collect weather and ocean data including air temperature, atmospheric humidity, sea surface temperature, sea temperature and...
Is féidir leat teacht ar an gclárlann seo freisin ag baint úsáide as an API (féach API Docs).