-
The Air Quality Index for Health (AQIH) is comprised of 6 regions as follows: Dublin, Cork, Large Towns (>15,000), Small Towns (5,000 – 15,000), Rural East and Rural West. The AQIH is calculated on an hourly basis using representative sampling from each region. Each region...
-
EnvironmentThe Medium towns of Republic of Ireland based on 2002 Central Statistics Office (CSO) town density data for the ROI.
-
This data set contains segmented catchments for rivers on a national basis. The data was derived from a digital terrain model, and therefore may not be accurate on a field-scale. The data set should be used with caution in karst areas and in areas where there is a high degree...
-
GovernmentThe Nomenclature of Territorial Units for Statistics (NUTS) were drawn up by Eurostat in order to define territorial units for the production of regional statistics across the European Union. The NUTS classification has been used in EU legislation since 1988, but it was only...
-
This is a points data set of the location of urban waste water emission points, at the estimated point at which the emission joins the surface water network.
-
These are the shellfish polygons as delineated originally as the 14 shellfish production areas listed in the Irish Shellfish Regulations (S.I. 200 / 1994), and updated in 2009 to include polygons delineated in accordance with European Communities (Quality of Shellfish Waters)...
-
This dataset shows Sub Surface Nitrate Susceptibility. Pollution Impact Potential (PIP) maps were generated separately for nitrate and phosphate to rank critical source areas (CSAs) relative to one another from diffuse agriculture for both the groundwater and surface water...
-
This data set shows the Extractive Industry sites, as registered by local authorities, as required under the Waste Management (Management of Waste from the Extractive Industries) Regulations 2009. Please note the data is entered and maintained by local authorities and does not...
-
Register of Protected Areas - Bathing Water Areas (WFD RBMP Cycle 2)Environmental Protection AgencyEnvironmentThis dataset represents a snapshot taken in September 2016 for the purpose of the WFD RBMP Cycle 2. Bathing Water Area profiles referred to in Regulation 5 is to consist of a description of the physical, geographical and hydrological characteristics of the bathing water, as...
-
GovernmentThe Nomenclature of Territorial Units for Statistics (NUTS) were drawn up by Eurostat in order to define territorial units for the production of regional statistics across the European Union. The NUTS classification has been used in EU legislation since 1988, but it was only...
-
This dataset represents the site locations of Domestic Waste Water Treatment Systems where inspections have been carried out under the National Inspection Plan. These locations have been captured by Local Authority Inspectors as part of the process of logging inspection...
-
This dataset was developed for the National Inspection Plan 2018 – 2021. The aim of the Plan is to protect water and human health from risks posed by domestic waste water treatment systems. The data consists of 10 risk zones. The zones were derived from the combination of...
-
This dataset shows Near Surface Phosphate Susceptibility. Pollution Impact Potential (PIP) maps were generated separately for nitrate and phosphate to rank critical source areas (CSAs) relative to one another from diffuse agriculture for both the groundwater and surface water...
-
WFD Register of Protected Areas - Surface Water Bodies for Drinking Water (WFD RBMP Cycle 3)Environmental Protection AgencyHealthThe lake drinking water protected areas (DWPA) are represented by the full extent of the Water Framework Directive (WFD) lake waterbodies from which there is a known qualifying abstraction of water for human consumption as defined under Article 7 of the WFD. This dataset...
-
Register of Protected Areas - Bathing Water Areas (WFD RBMP Cycle 3)Environmental Protection AgencyEnvironmentThis dataset represents a snapshot taken in December 2018 for the purpose of the WFD RBMP Cycle 3. Bathing Water Area profiles referred to in Regulation 5 is to consist of a description of the physical, geographical and hydrological characteristics of the bathing water, as...
-
WFD Register of Protected Areas - River Water Bodies for Drinking Water (WFD RBMP Cycle 3)Environmental Protection AgencyHealthThe river drinking water protected areas (DWPA) are represented by the full extent of the Water Framework Directive (WFD) river waterbodies from which there is a known qualifying abstraction of water for human consumption as defined under Article 7 of the WFD. This dataset...
-
WFD Register of Protected Areas - Groundwater bodies for Drinking Water (WFD RBMP Cycle 3)Environmental Protection AgencyHealthAll Water Framework Directive (WFD) Groundwater bodies have been identified as Drinking Water Protected Areas due to the potential for qualifying abstractions of water for human consumption as defined under Article 7 of the WFD. The groundwater drinking water protected areas...
-
EnvironmentThe Large towns of Republic of Ireland based on 2002 Central Statistics Office (CSO) town density data for the ROI.
-
This dataset indicates the likely susceptibility of groundwater to percolation of MRP and pathogens from Domestic Waste Water Treatment Systems (DWWTS) based on mapped geological information. This dataset was developed as part of A risk-based methodology to assist in the...
-
Register of Protected Areas - Nutrient Sensitive Areas (WFD RBMP Cycle 3)Environmental Protection AgencyEnvironmentThis dataset representing snapshot taken at the end of 2018 for the purpose of the WFD RBMP Cycle 3.. These nutrient sensitive areas are those waterbodies listed in accordance with the Urban Waste Water Treatment (UWWT) Directive 91/271/EEC on Urban Waste Water Treatment and...
Derilinx
*By submitting this form you consent to subscribing to our mailing-list and receiving information from the Open Data Unit in the Department of Public Expenditure and Reform about open data news and events.