-
ScienceA landslide is the movement of material down a slope. This includes rock, earth, mud and peat. Landslides in Ireland mainly occur on steep mountain slopes. A landslide susceptibility map shows areas where a landslide could occur, how likely it will occur and what causes them....
-
Bedrock is the solid rock at or below the land surface. Over much of Ireland, the bedrock is covered by materials such as soil and gravel. The Bedrock map shows what the land surface of Ireland would be made up of if these materials were removed. As the bedrock is commonly...
-
The Dublin Soil Urban Geochemistry Project is a baseline survey of heavy metals and organic chemicals in topsoils in the greater Dublin area. Topsoil is the upper surface layer of the soil and this geochemical baseline survey measures the amount and type of chemicals in these...
-
The 1:500k bedrock maps provide a simplified, smaller scale view of the bedrock geology of Ireland. The map was created in 2013 using the detailed 1:100k geology linework and polygons, which was adjusted and scaled to provide the best representation of the geology at this...
-
Section 10, Planning and Development Act 2005 requires that all Local Authorities consider the character of the landscape when drawing up objectives for their new county development plans, in the interests of proper planning and sustainable development. Landscape Character...
-
Section 10, Planning and Development Act 2005 requires that all Local Authorities consider the character of the landscape when drawing up objectives for their new county development plans, in the interests of proper planning and sustainable development. Landscape Character...
-
This data set shows the Extractive Industry sites, as registered by local authorities, as required under the Waste Management (Management of Waste from the Extractive Industries) Regulations 2009. Please note the data is entered and maintained by local authorities and does not...
-
Pollution Impact Potential (PIP) maps were generated separately for nitrate and phosphate to rank critical source areas (CSAs) relative to one another from diffuse agriculture for both the groundwater and surface water receptor. The PIP maps are generated by the EPA Catchment...
-
This map shows the areas where sub-bottom profile data is available in Irish waters. Sub-bottom profile data shows the rock features and the sediment layers that are below the seabed. A sub-bottom profile is created by sending sound waves from the vessel to the seabed. The...
-
Sub-bottom profile data shows the rock features and the sediment layers that are below the seabed. A sub-bottom profile is created by sending sound waves from the vessel to the seabed. The length of time it takes for these sound wave to return from the seabed to the vessel is...
-
Groundwater is the water that soaks into the ground from rain and is stored beneath the ground. An aquifer is a body of rock and/or sediment that holds groundwater. The process of rain filling up an aquifer is called ‘recharge’. The Groundwater Recharge map shows the amount of...
-
This dataset has no description
-
The Regional Ocean Modeling System (ROMS) is a free-surface, terrain-following, primitive equations ocean model widely used by the scientific community for a diverse range of applications. The operational Northeast Atlantic (NEATL) model is an implementation of the ROMS model...
-
Data on the offshore geologic intrusive bodies around Ireland. An intrusion is liquid rock that forms under Earth's surface. Magma from under the surface is slowly pushed up from deep within the earth into any cracks or spaces it can find, sometimes pushing existing country...
-
Bedrock is the solid rock at or below the land surface. Over much of Ireland, the bedrock is covered by materials such as soil and gravel. The Bedrock map shows what the land surface of Ireland would be made up of if these materials were removed. As the bedrock is commonly...
-
This data shows the depth of the seabed around Ireland. The data was collected in 1996 and between 2000 and 2022. Bathymetry is the measurement of how deep is the sea. Bathymetry is the study of the shape and features of the seabed. The name comes from Greek words meaning...
-
LiDAR (Light Detection and Ranging) is a remote sensing technology, i.e. the technology is not in direct contact with what is being measured. From satellite, aeroplane or helicopter, a LiDAR system sends a light pulse to the ground. This pulse hits the ground and returns back...
-
Research ships working at sea map the seafloor. The ships collect bathymetry data. Bathymetry is the measurement of how deep the sea is. Bathymetry is the study of the shape and features of the seabed. The name comes from Greek words meaning "deep" and “measure". Backscatter...
-
Location of marine basin divisions in the North Atlantic around Ireland. A geological basin is a large low-lying area. It is often below sea level. There are five designated basins and each basin represents a large submarine depression of a generally circular, elliptical or...
-
Bathymetry water depth survey including Esri raster Grid and contour vector lines at 1m intervals. Data coverage includes Lough Feeagh in the Burrishoole catchment Co. Mayo Ireland. Data collected from 2002 survey. Data collected using standard echosounder device gear mounted...